|
Install KVM
2015/11/28 |
|
It's Virtualization with KVM ( Kernel-based Virtual Machine ) + QEMU.
This requires that the CPU on your computer which has a function Intel VT or AMD-V. |
|
| [1] | Install required packages. |
|
dlp:~ #
zypper -n install kvm libvirt virt-manager bridge-utils # load modules dlp:~ # modprobe kvm dlp:~ # modprobe kvm_intel dlp:~ # kvm_intel 150650 0 kvm 427332 1 kvm_inteldlp:~ # /etc/init.d/libvirtd start dlp:~ # chkconfig libvirtd on |
| [2] | Configure Bridge networking for KVM virtual machines. |
|
dlp:~ # mv /etc/sysconfig/network/ifcfg-eth0 /etc/sysconfig/network/ifcfg-br0
dlp:~ #
vi /etc/sysconfig/network/ifcfg-br0 # add follows to the end BRIDGE='yes' BRIDGE_FORWARDDELAY='0' BRIDGE_PORTS='eth0' BRIDGE_STP='off'
dlp:~ #
vi /etc/sysconfig/network/routes # add gateway for br0 to the end
default 10.0.0.1 - br0
dlp:~ #
dlp:~ # /etc/init.d/network restart
br0 Link encap:Ethernet HWaddr 00:0C:29:4C:18:F8
inet addr:10.0.0.30 Bcast:10.0.0.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe4c:18f8/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:58 errors:0 dropped:0 overruns:0 frame:0
TX packets:68 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:5841 (5.7 Kb) TX bytes:16822 (16.4 Kb)
eth0 Link encap:Ethernet HWaddr 00:0C:29:4C:18:F8
inet6 addr: fe80::20c:29ff:fe4c:18f8/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:13999 errors:0 dropped:0 overruns:0 frame:0
TX packets:7242 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:18469005 (17.6 Mb) TX bytes:564689 (551.4 Kb)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:2 errors:0 dropped:0 overruns:0 frame:0
TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:100 (100.0 b) TX bytes:100 (100.0 b)
|